Hürlimann H-360 (A) vs VALMET 604 / 604-4

11 material differences · fewer than 12

Tractor one

Hürlimann H-360 (A)

1979–1983

No measured PTO figure

Tractor two

VALMET 604 / 604-4

1982–1985

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (2WD / 4WD; 2WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-360 (A) and VALMET 604 / 604-4, field by field
Field	H-360 (A)	604 / 604-4	Gap
Engine
Engine power, claimed claimed	61.2 hp	60.2 hp	—
Engine declared	Hürlimann H 1103	VALMET D 33 C	differs
Displacement declared	3.42 L	3.30 L	—
Maximum torque declared	169 lb·ft · 229 N·m	162 lb·ft · 220 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 604 / 604-4
Clutch declared	Dry SAME double clutch	Dry Fichtel & Sachs double clutch, type 11"/11"	differs
Hydraulics & hitch
Pump flow declared	8.9 gpm · 33.8 L/min	10.0 gpm · 38.0 L/min	+12% 604 / 604-4
Three-point lift at ends declared	3,889 lb · 1,764 kg	3,957 lb · 1,795 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,159 lb · 2,340 kg	6,173 lb · 2,800 kg	+20% 604 / 604-4
Wheelbase declared	83.9 in · 2,131 mm	83.1 in · 2,112 mm	—
Length declared	124.0 in · 3,150 mm	142.4 in · 3,617 mm	+15% 604 / 604-4
Width declared	72.0 in · 1,830 mm	76.0 in · 1,930 mm	+5% 604 / 604-4
Height declared	65.0 in · 1,650 mm	100.2 in · 2,545 mm	+54% 604 / 604-4
Ground clearance declared	16.5 in · 420 mm	18.5 in · 470 mm	+12% 604 / 604-4
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	63.4 qt · 60.0 L	68.7 qt · 65.0 L	+8% 604 / 604-4

Hürlimann H-360 (A) sources

Source

Source: Traktorenlexikon, “Hürlimann H 360”

VALMET 604 / 604-4 sources

Source

Source: Traktorenlexikon, “Valmet 604”