Hürlimann H-360 (A) vs Landini 6030 (DT) TL-39 N/B (TL-39 DT/B)

10 material differences · fewer than 12

Tractor one

1979–1983

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the H-360 (A) and the 6030 (DT) TL-39 N/B (TL-39 DT/B) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-360 (A) and Landini 6030 (DT) TL-39 N/B (TL-39 DT/B), field by field
Field	H-360 (A)	6030 (DT) TL-39 N/B (TL-39 DT/B)	Gap
Engine
Engine power, claimed claimed	61.2 hp	55.3 hp	+11% H-360 (A)
Engine declared	Hürlimann H 1103	Perkins AT 3.152-4	differs
Displacement declared	3.42 L	2.50 L	+37% H-360 (A)
Maximum torque declared	169 lb·ft · 229 N·m	131 lb·ft · 178 N·m	+29% H-360 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Clutch declared	Dry SAME double clutch	Dry and air-cooled OMG or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	8.9 gpm · 33.8 L/min	9.6 gpm · 36.5 L/min	+8% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	3,889 lb · 1,764 kg	4,429 lb · 2,009 kg	+14% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,159 lb · 2,340 kg	4,971 lb · 2,255 kg	—
Wheelbase declared	83.9 in · 2,131 mm	81.9 in · 2,080 mm	—
Length declared	124.0 in · 3,150 mm	138.2 in · 3,510 mm	+11% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Width declared	72.0 in · 1,830 mm	75.6 in · 1,920 mm	—
Height declared	65.0 in · 1,650 mm	91.9 in · 2,335 mm	+42% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Ground clearance declared	16.5 in · 420 mm	19.5 in · 495 mm	+18% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Turning radius, braked declared	—	12.4 ft · 3.79 m	—
Fuel tank declared	63.4 qt · 60.0 L	63.9 qt · 60.5 L	—

Source

Source