Hürlimann H-358 "Prestige" vs Massey Ferguson MF 4320 (A)

11 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the H-358 "Prestige" and the MF 4320 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-358 "Prestige" and Massey Ferguson MF 4320 (A), field by field
Field	H-358 "Prestige"	MF 4320 (A)	Gap
Engine
Engine power, claimed claimed	59.1 hp	63.2 hp	+7% MF 4320 (A)
Engine declared	Hürlimann H-1000.3 W	Perkins 903.27 Turbo	differs
Displacement declared	3.00 L	2.50 L	+20% H-358 "Prestige"
Maximum torque declared	149 lb·ft · 202 N·m	171 lb·ft · 232 N·m	+15% MF 4320 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry SLH single-plate clutch	pedal-operated dry and air-cooled single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.5 gpm · 28.5 L/min	15.9 gpm · 60.0 L/min	+111% MF 4320 (A)
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	3,748 lb · 1,700 kg	4,946 lb · 2,243 kg	+32% MF 4320 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,118 lb · 2,775 kg	5,258 lb · 2,385 kg	+16% H-358 "Prestige"
Maximum permissible mass declared	—	11,464 lb · 5,200 kg	—
Wheelbase declared	83.9 in · 2,130 mm	83.9 in · 2,130 mm	—
Length declared	148.0 in · 3,760 mm	147.2 in · 3,740 mm	—
Width declared	70.5 in · 1,790 mm	73.2 in · 1,860 mm	—
Height declared	100.0 in · 2,540 mm	94.1 in · 2,390 mm	+6% H-358 "Prestige"
Ground clearance declared	15.4 in · 390 mm	18.5 in · 470 mm	+21% MF 4320 (A)
Fuel tank declared	74.0 qt · 70.0 L	88.8 qt · 84.0 L	+20% MF 4320 (A)

Source

Source