Hürlimann H-355 (A) or VALMET 600?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the VALMET 600 is ahead on top speed.
- The VALMET 600 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | H-355 (A) | 600 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 35.6 kW (47.7 hp)Traktorenlexikon, “Hürlimann H 355” | 36.0 kW (48.3 hp)Traktorenlexikon, “Valmet 600” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the H-355 (A) and the 600. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the H-355 (A) and the 600. |
| Which pumps more oil for implements? | — | 55.7 L/min (14.7 gpm)Traktorenlexikon, “Valmet 600” | No figureNo call on hydraulic flow: no figure on record for the H-355 (A). |
| Which lifts more on the three-point hitch? | 1,672 kg (3,687 lb)Traktorenlexikon, “Hürlimann H 355” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 600” | Not comparableNot comparable on three-point lift: the H-355 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 355”); the 600: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 600”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 1,980 kg (4,365 lb)Traktorenlexikon, “Hürlimann H 355” | 3,130 kg (6,900 lb)Traktorenlexikon, “Valmet 600” | Ahead (a fact, not an advantage)The VALMET 600 is 58% heavier (1,150 kg / 2,535 lb) than the Hürlimann H-355 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the H-355 (A) and the 600. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Hürlimann H 355” | 8 to 16Traktorenlexikon, “Valmet 600” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the H-355 (A) and the 600. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann H 355” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 600” | AheadThe VALMET 600 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-355 (A) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Hürlimann H 355” | 540E/540 rpmTraktorenlexikon, “Valmet 600” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the H-355 (A) and the 600. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Hürlimann H 355” | 4WDTraktorenlexikon, “Valmet 600” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1986 | 1997–2002 | Ahead (a fact, not an advantage)The VALMET 600 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 600 is 58% heavier (1,150 kg / 2,535 lb) than the Hürlimann H-355 (A) (both unladen weight, as stated by the source).
- The VALMET 600 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-355 (A) (both top speed forward, as stated by the source).
- The VALMET 600 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the H-355 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 355”); the 600: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 600”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources