Hürlimann H-355 (A) vs VALMET 600
12 material differences
Which should you choose?
Read our verdict on the H-355 (A) and the 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | H-355 (A) | 600 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.1 hp | 59.1 hp | — |
| Engine declared | SAME 1.053 P | VALMET 320 D | differs |
| Displacement declared | 3.12 L | 3.30 L | +6% 600 |
| Maximum torque declared | 145 lb·ft · 196 N·m | 162 lb·ft · 220 N·m | +12% 600 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry SAME double clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 14.7 gpm · 55.7 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift at ends declared | 3,687 lb · 1,672 kg | 6,294 lb · 2,855 kg | +71% 600 |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,365 lb · 1,980 kg | 6,900 lb · 3,130 kg | +58% 600 |
| Wheelbase declared | 79.1 in · 2,008 mm | 83.1 in · 2,112 mm | — |
| Length declared | 140.6 in · 3,570 mm | 147.4 in · 3,745 mm | — |
| Width declared | 70.9 in · 1,800 mm | 84.2 in · 2,139 mm | +19% 600 |
| Height declared | 85.8 in · 2,180 mm | 104.7 in · 2,660 mm | +22% 600 |
| Ground clearance declared | 11.8 in · 300 mm | 19.9 in · 505 mm | +68% 600 |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 83.5 qt · 79.0 L | +46% 600 |
Hürlimann H-355 (A) sources
Source
- Source: Traktorenlexikon, “Hürlimann H 355”
- Source: Traktorenlexikon, “SAME Solar 60”
VALMET 600 sources
Source
- Source: Traktorenlexikon, “Valmet 600”
- Source: Traktorenlexikon, “Valmet 255”