7 material differences · fewer than 12
Tractor oneHürlimann H-351 (A)1986–1997No measured PTO figureTractor twoLandini 5830 (DT) TL-22 N/G (TL-DT/L)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the H-351 (A) and the 5830 (DT) TL-22 N/G (TL-DT/L) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | H-351 (A) | 5830 (DT) TL-22 N/G (TL-DT/L) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | Hürlimann 983 L | Perkins AD 3.152 S | differs |
| Displacement declared | 2.72 L | 2.50 L | +9% H-351 (A) |
| Maximum torque declared | 104 lb·ft · 141 N·m | 133 lb·ft · 181 N·m | +28% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | pedal-operated dry SLH single-disc clutch | Dry, air-cooled OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.5 gpm · 36.1 L/min | — |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,586 lb · 2,080 kg | 4,674 lb · 2,120 kg | — |
| Wheelbase declared | 82.1 in · 2,085 mm | 81.9 in · 2,080 mm | — |
| Length declared | 135.4 in · 3,440 mm | 140.7 in · 3,575 mm | — |
| Width declared | 69.3–89.0 in · 1,760–2,260 mm | 69.1 in · 1,755 mm | differs |
| Ground clearance declared | 13.0 in · 330 mm | 17.1 in · 435 mm | +32% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Turning radius, braked declared | — | 12.4 ft · 3.79 m | — |
| Fuel tank declared | 58.1 qt · 55.0 L | 63.9 qt · 60.5 L | +10% 5830 (DT) TL-22 N/G (TL-DT/L) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-351 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 351”
Landini 5830 (DT) TL-22 N/G (TL-DT/L) sources
- Source: Traktorenlexikon, “Landini 5830 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”