Hürlimann H-345 (A) vs Steyr 942 (a)

8 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1992–1996

No measured PTO figure

Which should you choose?

Read our verdict on the H-345 (A) and the 942 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann H-345 (A) and Steyr 942 (a), field by field
Field	H-345 (A)	942 (a)	Gap
Engine
Engine power, claimed claimed	47.3 hp	—	—
Engine declared	SAME 983-L	Steyr WD 308.48	differs
Displacement declared	2.72 L	2.36 L	+15% H-345 (A)
Maximum torque declared	—	108 lb·ft · 147 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry double clutch	Pedal operated driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	9.0 gpm · 34.0 L/min	7.8 gpm · 29.4 L/min	+16% H-345 (A)
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	3,889 lb · 1,764 kg	4,012 lb · 1,820 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,453 lb · 2,020 kg	5,214 lb · 2,365 kg	+17% 942 (a)
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	76.6 in · 1,945 mm	77.5 in · 1,968 mm	—
Length declared	126.0 in · 3,200 mm	129.9 in · 3,300 mm	—
Width declared	67.7 in · 1,720 mm	73.6 in · 1,870 mm	+9% 942 (a)
Height declared	86.6 in · 2,200 mm	89.0 in · 2,260 mm	—
Ground clearance declared	18.7 in · 475 mm	18.1 in · 460 mm	—
Turning radius, braked declared	—	10.8 ft · 3.28 m	—
Fuel tank declared	57.1 qt · 54.0 L	56.0 qt · 53.0 L	—

Source

Source