Hürlimann H-272 TA vs Massey Ferguson MF 274 S (A)

10 material differences · fewer than 12

Tractor one

1989–1996

No measured PTO figure

Tractor two

1982–1987

No measured PTO figure

Which should you choose?

Read our verdict on the H-272 TA and the MF 274 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann H-272 TA and Massey Ferguson MF 274 S (A), field by field
Field	H-272 TA	MF 274 S (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	64.1 hp	+8% H-272 TA
Engine declared	Hürlimann H-1000.3 AT	Perkins A 4.236	differs
Displacement declared	3.00 L	3.87 L	+29% MF 274 S (A)
Maximum torque declared	174 lb·ft · 236 N·m	176 lb·ft · 239 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry SLH double clutch	Pedal operated dry and air cooled double clutch	differs
Hydraulics & hitch
Pump flow declared	7.0 gpm · 26.4 L/min	7.7 gpm · 29.0 L/min	+10% MF 274 S (A)
Pressure declared	1,305 psi · 90 bar	—	—
Three-point lift at ends declared	3,968 lb · 1,800 kg	4,321 lb · 1,960 kg	+9% MF 274 S (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,283 lb · 2,850 kg	6,305 lb · 2,860 kg	—
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	86.4 in · 2,194 mm	86.2 in · 2,190 mm	—
Length declared	152.0 in · 3,860 mm	143.7 in · 3,650 mm	+6% H-272 TA
Width declared	76.0 in · 1,930 mm	76.0 in · 1,930 mm	—
Height declared	93.5 in · 2,375 mm	103.1 in · 2,620 mm	+10% MF 274 S (A)
Ground clearance declared	14.4 in · 365 mm	15.4 in · 390 mm	+7% MF 274 S (A)
Turning radius, braked declared	11.2 ft · 3.42 m	11.2 ft · 3.40 m	—
Fuel tank declared	82.4 qt · 78.0 L	65.5 qt · 62 L	+26% H-272 TA

Source

Source