8 material differences · fewer than 12
Tractor oneHürlimann D-95 L/S1975–1977No measured PTO figureTractor twoVALMET 5001968–1971No measured PTO figure
Which should you choose?
Read our verdict on the D-95 L/S and the 500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D-95 L/S | 500 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 48 hp | +9% 500 |
| Engine declared | Hürlimann DS-95 | VALMET 310 B | differs |
| Displacement declared | 2.95 L | 2.69 L | +10% D-95 L/S |
| Maximum torque declared | — | 124 lb·ft · 168 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 500 |
| Clutch declared | — | Pedal operated dry Borg & Beck single plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.2 gpm · 31.0 L/min | 6.4 gpm · 24.1 L/min | +29% D-95 L/S |
| Pressure declared | 2,702 psi · 186 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,475 lb · 2,030 kg | 4,579 lb · 2,077 kg | — |
| Wheelbase declared | 74.8 in · 1,900 mm | 75.3 in · 1,912 mm | — |
| Length declared | 129.9 in · 3,300 mm | 125.2 in · 3,180 mm | — |
| Width declared | 68.9 in · 1,750 mm | 73.6–112.2 in · 1,870–2,850 mm | differs |
| Ground clearance declared | 14.4 in · 365 mm | 16.3 in · 415 mm | +14% 500 |
| Turning radius, braked declared | 8.4 ft · 2.55 m | 10.2 ft · 3.11 m | +22% 500 |
| Fuel tank declared | 42.3 qt · 40.0 L | 42.3 qt · 40.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D-95 L/S sources
- Source: Traktorenlexikon, “Hürlimann D 95 L/S”
- Source: Traktorenlexikon, “Hürlimann D 110”
VALMET 500 sources
- Source: Traktorenlexikon, “Valmet 500”