Hürlimann D 80 SSP vs International Harvester D-430 Standard

6 material differences · fewer than 12

Tractor one

1955–1958

No measured PTO figure

Tractor two

1958–1962

No measured PTO figure

Which should you choose?

Read our verdict on the D 80 SSP and the D-430 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

Hürlimann D 80 SSP and International Harvester D-430 Standard, field by field
Field	D 80 SSP	D-430 Standard	Gap
Engine
Engine power, claimed claimed	29.6 hp	29.6 hp	—
Engine declared	Hürlimann D-80	INTERNATIONAL-HARVESTER DD-132	differs
Displacement declared	2.36 L	2.18 L	+8% D 80 SSP
Maximum torque declared	87 lb·ft · 118 N·m	90 lb·ft · 122 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4 mph · 20 km/h	—
Clutch declared	—	Pedal-operated dry single-plate clutch from Fichtel & Sachs	—
Hydraulics & hitch
Pump flow declared	—	4.1 gpm · 15.5 L/min	—
Pressure declared	640 psi · 44 bar	—	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	540/1400 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,638 lb · 1,650 kg	3,402 lb · 1,543 kg	+7% D 80 SSP
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	71.3 in · 1,810 mm	74.0 in · 1,879 mm	—
Length declared	112.6 in · 2,860 mm	115.4 in · 2,930 mm	—
Width declared	63.4 in · 1,610 mm	64.6 in · 1,640 mm	—
Height declared	60.2 in · 1,530 mm	61.0 in · 1,550 mm	—
Ground clearance declared	12.2 in · 310 mm	15.2 in · 385 mm	+24% D-430 Standard
Turning radius, braked declared	8.9 ft · 2.70 m	8.7 ft · 2.65 m	—
Fuel tank declared	38.0 qt · 36 L	31.7–58.1 qt · 30.0–55.0 L	differs

Source

Source