Hürlimann D-600 vs J.I. Case 511-B
8 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (80%); they were not built in overlapping years (1951–1954; 1958–1960). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D-600 | 511-B | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68.3 hp | 44.4 hp | +54% D-600 |
| Engine declared | Hürlimann D-300 | CASE 164 | differs |
| Displacement declared | 5.52 L | 2.70 L | +105% D-600 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4–18.6 mph · 20–30 km/h | differs |
| Clutch declared | Pedal operated dry single plate clutch | pedal-operated CASE single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.0 gpm · 11.4 L/min | — |
| Pressure declared | 498 psi · 34 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,488 lb · 3,850 kg | 4,720 lb · 2,141 kg | +80% D-600 |
| Wheelbase declared | — | 87.0 in · 2,210 mm | — |
| Length declared | 143.7 in · 3,650 mm | 138.0 in · 3,505 mm | — |
| Width declared | 74.8 in · 1,900 mm | 80.7 in · 2,051 mm | +8% 511-B |
| Height declared | 77.6 in · 1,970 mm | 65.5 in · 1,664 mm | +18% D-600 |
| Ground clearance declared | 16.9 in · 430 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.25 m | — | — |
| Fuel tank declared | 116.2 qt · 110 L | 55.2 qt · 52.2 L | +111% D-600 |
Hürlimann D-600 sources
Source
- Source: Traktorenlexikon, “Hürlimann D 600”
- Source: Traktorenlexikon, “Hürlimann D 300”
J.I. Case 511-B sources
Source
- Source: Traktorenlexikon, “Case 511-B”