Hürlimann D-300 vs John Deere 730
8 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (31%); they were not built in overlapping years (1947–1954; 1958–1960). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | D-300 | 730 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.2 hp | 53.2 hp | — |
| Engine declared | Hürlimann D-300 | — | — |
| Displacement declared | 5.52 L | — | — |
| Maximum torque declared | 205 lb·ft · 279 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.8 mph · 19.0 km/h | +5% D-300 |
| Clutch declared | Pedal operated dry single plate clutch | Hand lever operated dry six-plate multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.9 gpm · 33.7 L/min | — |
| Rear PTO speeds declared | 540 rpm | 547 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,622 lb · 2,550 kg | 7,381 lb · 3,348 kg | +31% 730 |
| Wheelbase declared | — | 82.4 in · 2,092 mm | — |
| Length declared | 110.2 in · 2,800 mm | 130.2 in · 3,308 mm | +18% 730 |
| Width declared | 62.2 in · 1,580 mm | 86.6 in · 2,200 mm | +39% 730 |
| Height declared | 60.2 in · 1,530 mm | 79.4 in · 2,016 mm | +32% 730 |
| Ground clearance declared | — | 13.0 in · 330 mm | — |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 14.0 ft · 4.27 m | +38% 730 |
Hürlimann D-300 sources
Source
- Source: Traktorenlexikon, “Hürlimann D 300”
John Deere 730 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 730”