7 material differences · fewer than 12
Tractor oneHürlimann D 200 S1966–1971No measured PTO figureTractor twoLeyland 2701973–1975No measured PTO figure
Which should you choose?
Read our verdict on the D 200 S and the 270 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 200 S | 270 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 70.0 hp | +9% 270 |
| Engine declared | Hürlimann D-120 | LEYLAND-MOTORS 4/98 NT | differs |
| Displacement declared | 4.43 L | 3.77 L | +18% D 200 S |
| Maximum torque declared | — | 190 lb·ft · 258 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 16.2 mph · 26 km/h | +30% 270 |
| Clutch declared | — | Dry Borg & Beck double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.5 gpm · 32.0 L/min | 8.5 gpm · 32.3 L/min | — |
| Pressure declared | 2,418 psi · 167 bar | — | — |
| Three-point lift, at the coupling points declared | 4,079 lb · 1,850 kg | 3,999 lb · 1,814 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,776 lb · 2,620 kg | 5,765 lb · 2,615 kg | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 80.2 in · 2,038 mm | — |
| Length declared | 131.9 in · 3,350 mm | 144.9 in · 3,680 mm | +10% 270 |
| Width declared | 67.7 in · 1,720 mm | 80.3 in · 2,040 mm | +19% 270 |
| Ground clearance declared | 16.1 in · 410 mm | 16.9 in · 429 mm | — |
| Turning radius, braked declared | 10.5 ft · 3.20 m | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 42.3 qt · 40.0 L | 72.0 qt · 68.1 L | +70% 270 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D 200 S sources
Source
- Source: Traktorenlexikon, “Hürlimann D 200 S”
Leyland 270 sources
Source
- Source: Traktorenlexikon, “Leyland 270”