Hürlimann 910.6 XT vs Massey Ferguson MF 6265 (A)

10 material differences · fewer than 12

Tractor one

1995–2004

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 910.6 XT and the MF 6265 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann 910.6 XT and Massey Ferguson MF 6265 (A), field by field
Field	910.6 XT	MF 6265 (A)	Gap
Engine
Engine power, claimed claimed	103.5 hp	103.7 hp	—
Engine declared	Hürlimann H-1000.6 W1	Perkins 1004.40 TWG	differs
Displacement declared	6.00 L	3.99 L	+50% 910.6 XT
Maximum torque declared	253 lb·ft · 343 N·m	291 lb·ft · 394 N·m	+15% MF 6265 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated hydraulic Valeo multi-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	10.8 gpm · 41.0 L/min	25.3 gpm · 95.7 L/min	+133% MF 6265 (A)
Pressure declared	3,046 psi · 210 bar	3,336 psi · 230 bar	+10% MF 6265 (A)
Three-point lift at ends declared	—	9,370 lb · 4,250 kg	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000/540E/1000E rpm	—
Weight & dimensions
Unladen weight declared	10,031 lb · 4,550 kg	9,987 lb · 4,530 kg	—
Maximum permissible mass declared	—	19,401 lb · 8,800 kg	—
Wheelbase declared	103.7 in · 2,635 mm	101.3 in · 2,574 mm	—
Length declared	175.2 in · 4,450 mm	171.3 in · 4,350 mm	—
Width declared	81.9 in · 2,080 mm	80.0 in · 2,033 mm	—
Height declared	106.9 in · 2,715 mm	114.2 in · 2,900 mm	+7% MF 6265 (A)
Ground clearance declared	17.9 in · 455 mm	16.9 in · 430 mm	+6% 910.6 XT
Turning radius, braked declared	15.3 ft · 4.67 m	—	—
Fuel tank declared	147.9 qt · 140.0 L	237.8 qt · 225.0 L	+61% MF 6265 (A)

Source

Source