Hermann Lanz D 648 Allrad vs URSUS C-360 3P

9 material differences · fewer than 12

Tractor one

1973–1978

No measured PTO figure

Tractor two

1981–1993

No measured PTO figure

Which should you choose?

Read our verdict on the D 648 Allrad and the C-360 3P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Hermann Lanz D 648 Allrad and URSUS C-360 3P, field by field
Field	D 648 Allrad	C-360 3P	Gap
Engine
Engine power, claimed claimed	47.1 hp	46.8 hp	—
Engine declared	MWM D 225-3 ( 10/1973 bis 12/1974 )	PERKINS AD 3.152 UR	differs
Displacement declared	—	2.50 L	—
Maximum torque declared	—	122 lb·ft · 165 N·m	—
Transmission
Top speed declared	17.6 mph · 28.4 km/h	15.5 mph · 25 km/h	+14% D 648 Allrad
Clutch declared	Maintenance-free dry single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	—	5.7 gpm · 21.5 L/min	—
Three-point lift at ends declared	4,079 lb · 1,850 kg	2,646 lb · 1,200 kg	+54% D 648 Allrad
Rear PTO speeds declared	595/980 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,291 lb · 2,400 kg	4,533 lb · 2,056 kg	+17% D 648 Allrad
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	84.3 in · 2,140 mm	85.5 in · 2,172 mm	—
Length declared	141.7 in · 3,600 mm	142.1 in · 3,610 mm	—
Width declared	66.9 in · 1,700 mm	70.9 in · 1,800 mm	+6% C-360 3P
Height declared	51.2 in · 1,300 mm	80.7 in · 2,050 mm	+58% C-360 3P
Ground clearance declared	14.6 in · 370 mm	17.3 in · 440 mm	+19% C-360 3P
Turning radius, braked declared	14.3 ft · 4.35 m	11.1 ft · 3.37 m	+29% D 648 Allrad
Fuel tank declared	74.0 qt · 70 L	71.9 qt · 68.0 L	—

Source

Source