Hermann Lanz D 634 L vs UTB U-360
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 634 L and the U-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 634 L | U-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34.5 hp | — |
| Engine declared | MWM D 325-3 | UTB D-115.000 | differs |
| Displacement declared | 2.55 L | 2.40 L | +6% D 634 L |
| Maximum torque declared | — | 97 lb·ft · 132 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.3 mph · 23 km/h | +9% D 634 L |
| Clutch declared | Dual clutch by Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.8 gpm · 21.8 L/min | — |
| Three-point lift at ends declared | 4,079 lb · 1,850 kg | 2,646 lb · 1,200 kg | +54% D 634 L |
| Rear PTO speeds declared | 545/1050 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,924 lb · 1,780 kg | 3,799 lb · 1,723 kg | — |
| Wheelbase declared | 81.9 in · 2,080 mm | 75.5 in · 1,918 mm | +8% D 634 L |
| Length declared | 129.9 in · 3,300 mm | 113.0 in · 2,870 mm | +15% D 634 L |
| Width declared | 59.8 in · 1,520 mm | 65.9 in · 1,674 mm | +10% U-360 |
| Height declared | 57.9 in · 1,470 mm | 55.2 in · 1,403 mm | — |
| Ground clearance declared | 13.0 in · 330 mm | 18.0 in · 457 mm | +38% U-360 |
| Turning radius, braked declared | — | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 37.0 qt · 35 L | 56.0 qt · 53.0 L | +51% U-360 |
Hermann Lanz D 634 L sources
Source
- Source: Traktorenlexikon, “HELA D 634 L (D 635 L)”
- Source: Traktorenlexikon, “Renault 60 R7253”
UTB U-360 sources
Source
- Source: Traktorenlexikon, “UTB U 360”
- Source: Traktorenlexikon, “UTB U 453 DT”