Hermann Lanz D 260 A vs International Harvester 585

9 material differences · fewer than 12

Tractor one

1971–1979

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the D 260 A and the 585 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Hermann Lanz D 260 A and International Harvester 585, field by field
Field	D 260 A	585	Gap
Engine
Engine power, claimed claimed	58.9 hp	58.2 hp	—
Engine declared	MWM D 225-4 ( 7/1971 bis 3/1976 )	INTERNATIONAL-HARVESTER D-206	differs
Displacement declared	—	3.38 L	—
Maximum torque declared	166 lb·ft · 226 N·m	161 lb·ft · 218 N·m	—
Transmission
Top speed declared	15.8 mph · 25.4 km/h	15.5 mph · 25 km/h	—
Clutch declared	Double clutch by Fichtel & Sachs	Pedal-operated dry LAYCOCK single-disc clutch	differs
Hydraulics & hitch
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	4,299–5,291 lb · 1,950–2,400 kg	4,398 lb · 1,995 kg	differs
Rear PTO speeds declared	552/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,658 lb · 3,020 kg	6,393 lb · 2,900 kg	—
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	92.5 in · 2,350 mm	85.0 in · 2,159 mm	+9% D 260 A
Length declared	141.7 in · 3,600 mm	142.1 in · 3,610 mm	—
Width declared	76.0 in · 1,930 mm	72.8 in · 1,850 mm	—
Height declared	89.4 in · 2,270 mm	103.1 in · 2,620 mm	+15% 585
Ground clearance declared	15.7 in · 400 mm	14.1 in · 358 mm	+12% D 260 A
Turning radius, braked declared	18.0 ft · 5.50 m	10.7 ft · 3.25 m	+69% D 260 A
Fuel tank declared	74.0 qt · 70 L	118.3 qt · 112.0 L	+60% 585

Source

Source