8 material differences · fewer than 12

Tractor oneHanomag C 1121957–1960No measured PTO figureTractor twoKramer KA 1101956–1958No measured PTO figure

Which should you choose?

Read our verdict on the C 112 and the KA 110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 2 fields identical or within 5%, which is not counted as material

Hanomag C 112 and Kramer KA 110, field by field
FieldC 112KA 110Gap
Engine
Engine power, claimed claimed11.8 hp10.9 hp+9% C 112
Maximum torque declared29 lb·ft · 39 N·m29 lb·ft · 39 N·m—
Transmission
Top speed declared11.8 mph · 19 km/h11.8 mph · 19 km/h—
Clutch declaredstandard single dry clutch built into the flywheelSingle dry clutchdiffers
Hydraulics & hitch
Pump flow declared2.4 gpm · 9.0 L/min——
Pressure declared1,138 psi · 78 bar1,707 psi · 118 bar+51% KA 110
Rear PTO speeds declared14841760differs
Weight & dimensions
Unladen weight declared1,764 lb · 800 kg2,105 lb · 955 kg+19% KA 110
Wheelbase declared70.9 in · 1,800 mm61.0 in · 1,550 mm+16% C 112
Length declared107.5 in · 2,730 mm102.0 in · 2,590 mm+5% C 112
Width declared58.3–65.7 in · 1,480–1,670 mm58.7 in · 1,490 mmdiffers
Ground clearance declared16.3 in · 415 mm15.0 in · 380 mm+9% C 112
Turning radius, braked declared7.9 ft · 2.40 m——
Fuel tank declared—19.0 qt · 18 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hanomag C 112 sources

Source
  • Source: Traktorenlexikon, “Hanomag C 112”

Kramer KA 110 sources

Source
  • Source: Traktorenlexikon, “Kramer KA 110”