7 material differences · fewer than 12
Tractor oneHanomag C 1121957–1960No measured PTO figureTractor twoHermann Zanker KG M 11949–1951No measured PTO figure
Which should you choose?
Read our verdict on the C 112 and the M 1 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | C 112 | M 1 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 11.8 hp | 11.8 hp | — |
| Engine declared | — | Zanker M1 | — |
| Displacement declared | — | 1.02 L | — |
| Maximum torque declared | 29 lb·ft · 39 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 10.6 mph · 17 km/h | +12% C 112 |
| Clutch declared | standard single dry clutch built into the flywheel | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 2.4 gpm · 9.0 L/min | — | — |
| Pressure declared | 1,138 psi · 78 bar | — | — |
| Rear PTO speeds declared | 1484 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 1,764 lb · 800 kg | 2,612–3,064 lb · 1,185–1,390 kg | differs |
| Maximum permissible mass declared | — | 3,748 lb · 1,700 kg | — |
| Wheelbase declared | 70.9 in · 1,800 mm | 57.8 in · 1,468 mm | +23% C 112 |
| Length declared | 107.5 in · 2,730 mm | 97.0 in · 2,465 mm | +11% C 112 |
| Width declared | 58.3–65.7 in · 1,480–1,670 mm | 57.9 in · 1,470 mm | differs |
| Ground clearance declared | 16.3 in · 415 mm | 11.8 in · 300 mm | +38% C 112 |
| Turning radius, braked declared | 7.9 ft · 2.40 m | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag C 112 sources
Source
- Source: Traktorenlexikon, “Hanomag C 112”
Hermann Zanker KG M 1 sources
Source
- Source: Traktorenlexikon, “Zanker M1”
- Source: Traktorenlexikon, “Bautz B 14 AS/AS 14”