Güldner G 60 (S) vs Massey Ferguson MF 274 S (Traktorenlexikon)

3 material differences · fewer than 12

Tractor one

Güldner G 60 (S)

1968–1969

No measured PTO figure

Tractor two

Massey Ferguson MF 274 S (Traktorenlexikon)

1980–1987

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (2WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1968–1969; 1980–1987). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

3 material differences · 6 fields identical or within 5%, which is not counted as material

Güldner G 60 (S) and Massey Ferguson MF 274 S (Traktorenlexikon), field by field
FieldG 60 (S)MF 274 SGap
Engine
Engine power, claimed claimed59.3 hp59 hp
Engine declaredGüldner 6 L 79
Displacement declared4.71 L
Maximum torque declared174 lb·ft · 236 N·m176 lb·ft · 239 N·m
Transmission
Top speed declared16.3 mph · 26.22 km/h18.6 mph · 30 km/h+14% MF 274 S
Clutch declaredTwo-stage clutch
Hydraulics & hitch
Pump flow declared9.5 gpm · 36.0 L/min
Pressure declared2,134 psi · 147 bar
Three-point lift at ends declared4,850 lb · 2,200 kg
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared6,063 lb · 2,750 kg6,305 lb · 2,860 kg
Maximum permissible mass declared9,700 lb · 4,400 kg
Wheelbase declared91.1 in · 2,315 mm87.0 in · 2,210 mm
Length declared155.7 in · 3,955 mm148.0 in · 3,760 mm
Width declared73.4 in · 1,865 mm78.7 in · 2,000 mm+7% MF 274 S
Height declared64.0 in · 1,625 mm96.9 in · 2,460 mm+51% MF 274 S
Ground clearance declared15.7 in · 400 mm
Turning radius, braked declared11.7 ft · 3.58 m
Fuel tank declared68.7 qt · 65 L

Güldner G 60 (S) sources

Source
  • Source: Traktorenlexikon, “Güldner G 60”
  • Source: Traktorenlexikon, “Güldner G 75”

Massey Ferguson MF 274 S (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 274S”