Güldner G 40A (S) vs SAME DA 38 (DT)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 40A (S) and the DA 38 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | G 40A (S) | DA 38 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 37.4 hp | — |
| Engine declared | Güldner 3 L 79 | SAME DA 1103 | differs |
| Displacement declared | 2.36 L | 3.42 L | +45% DA 38 (DT) |
| Maximum torque declared | 95 lb·ft · 128 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% DA 38 (DT) |
| Clutch declared | Pedal operated dry double clutch from Fichtel & Sachs | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.0 gpm · 11.5 L/min | — |
| Pressure declared | — | 711 psi · 49.0 bar | — |
| Three-point lift at ends declared | 3,369 lb · 1,528 kg | — | — |
| Rear PTO speeds declared | 540/1150 rpm | 585 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,170 lb · 2,345 kg | 4,806 lb · 2,180 kg | +8% G 40A (S) |
| Wheelbase declared | 76.9 in · 1,954 mm | 74.8 in · 1,900 mm | — |
| Length declared | 131.0 in · 3,328 mm | 117.7 in · 2,990 mm | +11% G 40A (S) |
| Width declared | 68.9 in · 1,750 mm | 68.1 in · 1,730 mm | — |
| Height declared | 60.9 in · 1,547 mm | 68.1 in · 1,730 mm | +12% DA 38 (DT) |
| Ground clearance declared | 15.2 in · 387 mm | 14.8 in · 375 mm | — |
| Turning radius, braked declared | 10.3 ft · 3.15 m | — | — |
| Fuel tank declared | 52.8 qt · 50 L | 38.0 qt · 36.0 L | +39% G 40A (S) |
Güldner G 40A (S) sources
Source
- Source: Traktorenlexikon, “Güldner G 40A”
- Source: Traktorenlexikon, “Güldner G 40 Toledo”
SAME DA 38 (DT) sources
Source
- Source: Traktorenlexikon, “SAME DA 38 (DT)”