Güldner G 40 (Toledo) vs Renault 361

13 material differences

Tractor one

1962

No measured PTO figure

Tractor two

1972–1977

No measured PTO figure

Which should you choose?

Read our verdict on the G 40 (Toledo) and the 361 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Güldner G 40 (Toledo) and Renault 361, field by field
Field	G 40 (Toledo)	361	Gap
Engine
Engine power, claimed claimed	35.34 hp	35.5 hp	—
Engine declared	Güldner 3 L 79	MWM D 325-3	differs
Displacement declared	2.36 L	2.55 L	+8% 361
Maximum torque declared	95 lb·ft · 128 N·m	105 lb·ft · 142 N·m	+11% 361
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Foot-operated dry double clutch	Dry Verto double clutch	differs
Hydraulics & hitch
Pump flow declared	4.2 gpm · 16.0 L/min	6.8 gpm · 25.9 L/min	+62% 361
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	3,748 lb · 1,700 kg	4,497 lb · 2,040 kg	+20% 361
Rear PTO speeds declared	540/1150 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,442 lb · 2,015 kg	4,817 lb · 2,185 kg	+8% 361
Maximum permissible mass declared	4,526 lb · 2,053 kg	—	—
Wheelbase declared	76.9 in · 1,954 mm	78.0 in · 1,982 mm	—
Length declared	120.9 in · 3,070 mm	130.4 in · 3,312 mm	+8% 361
Width declared	61.9 in · 1,572 mm	66.1 in · 1,680 mm	+7% 361
Height declared	58.5 in · 1,485 mm	93.3 in · 2,370 mm	+60% 361
Ground clearance declared	15.7 in · 400 mm	15.7 in · 400 mm	—
Turning radius, braked declared	9.8 ft · 3.00 m	10.9 ft · 3.31 m	+10% 361
Fuel tank declared	50.7 qt · 48 L	50.7 qt · 48.0 L	—

Source

Source