Güldner G 35 (S) vs SOMECA SOM-30 B

11 material differences · fewer than 12

Tractor one

1967–1969

No measured PTO figure

Tractor two

1960–1963

No measured PTO figure

Which should you choose?

Read our verdict on the G 35 (S) and the SOM-30 B → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Güldner G 35 (S) and SOMECA SOM-30 B, field by field
Field	G 35 (S)	SOM-30 B	Gap
Engine
Engine power, claimed claimed	34.3 hp	34.5 hp	—
Engine declared	Güldner 3 L 79	O.M.-FIAT 605 D 015	differs
Displacement declared	2.36 L	1.90 L	+24% G 35 (S)
Maximum torque declared	95 lb·ft · 128 N·m	74 lb·ft · 101 N·m	+27% G 35 (S)
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4 mph · 20 km/h	—
Clutch declared	Pedal-operated dry double clutch by Fichtel & Sachs	Pedal-operated two-stage dry double clutch	differs
Hydraulics & hitch
Pump flow declared	—	4.4 gpm · 16.5 L/min	—
Pressure declared	2,134 psi · 147 bar	2,843 psi · 196 bar	+33% SOM-30 B
Three-point lift at ends declared	3,417 lb · 1,550 kg	1,984 lb · 900 kg	+72% G 35 (S)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,178 lb · 1,895 kg	3,770 lb · 1,710 kg	+11% G 35 (S)
Maximum permissible mass declared	7,055 lb · 3,200 kg	—	—
Wheelbase declared	76.9 in · 1,954 mm	69.9 in · 1,776 mm	+10% G 35 (S)
Length declared	128.0 in · 3,250 mm	113.4 in · 2,880 mm	+13% G 35 (S)
Width declared	65.4 in · 1,662 mm	59.1 in · 1,500 mm	+11% G 35 (S)
Height declared	59.4 in · 1,510 mm	57.1 in · 1,450 mm	—
Ground clearance declared	15.7 in · 400 mm	15.7 in · 400 mm	—
Turning radius, braked declared	10.3 ft · 3.15 m	10.8 ft · 3.30 m	—
Fuel tank declared	—	41.2 qt · 39.0 L	—

Source

Source