Güldner A 2 BL vs International Harvester D-324 Standard

7 material differences · fewer than 12

Tractor one

1959–1960

No measured PTO figure

Tractor two

1958–1962

No measured PTO figure

Which should you choose?

Read our verdict on the A 2 BL and the D-324 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

Güldner A 2 BL and International Harvester D-324 Standard, field by field
Field	A 2 BL	D-324 Standard	Gap
Engine
Engine power, claimed claimed	24.5 hp	23.7 hp	—
Engine declared	Güldner 2 LB	INTERNATIONAL-HARVESTER DD-111	differs
Displacement declared	1.84 L	1.83 L	—
Maximum torque declared	72 lb·ft · 98 N·m	73 lb·ft · 99 N·m	—
Transmission
Top speed declared	11.8 mph · 19.0 km/h	11.8 mph · 19 km/h	—
Clutch declared	Pedal operated dry Fichtel & Sachs single-plate clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Pressure declared	1,991 psi · 137 bar	—	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,219 lb · 1,460 kg	3,386 lb · 1,536 kg	—
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	78.0 in · 1,980 mm	70.0 in · 1,779 mm	+11% A 2 BL
Length declared	123.5 in · 3,138 mm	108.3 in · 2,750 mm	+14% A 2 BL
Width declared	59.1 in · 1,500 mm	64.6 in · 1,640 mm	+9% D-324 Standard
Height declared	63.0 in · 1,600 mm	61.0 in · 1,550 mm	—
Ground clearance declared	16.1 in · 410 mm	15.1 in · 383 mm	+7% A 2 BL
Turning radius, braked declared	—	9.2 ft · 2.80 m	—
Fuel tank declared	37.0 qt · 35 L	31.7 qt · 30.0 L	+17% A 2 BL

Source

Source