Ford 8730 or Hürlimann H-6160 A?
Which should you choose?
On performance, every comparable figure that differs favours the Ford 8730: hydraulic flow and maximum permissible mass. It is also ahead on top speed.
- The Ford 8730 suits loader and hydraulic implement work better on this data: 85% (49.1 L/min / 13.0 gpm) more hydraulic flow.
- The Ford 8730 suits road haulage better on this data: 23% (2,100 kg / 4,630 lb) more maximum permissible mass and 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8730 | H-6160 A | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 99.2 kW (133.0 hp)Traktorenlexikon, “Ford 8730” | 100.4 kW (134.6 hp)Traktorenlexikon, “Hürlimann H 6160” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8730 and the H-6160 A. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8730 and the H-6160 A. |
| Which pumps more oil for implements? | 107.1 L/min (28.3 gpm)Traktorenlexikon, “Ford 8730” | 58.0 L/min (15.3 gpm)Traktorenlexikon, “Hürlimann H 6160” | AheadThe Ford 8730 has 85% more hydraulic flow (49.1 L/min / 13.0 gpm) than the Hürlimann H-6160 A (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,800 kg (14,991 lb)Traktorenlexikon, “Ford 8730” | — | No figureNo call on three-point lift: no figure on record for the H-6160 A. |
| Which is heavier, for traction? | 6,740 kg (14,859 lb)Traktorenlexikon, “Ford 8730” | 6,450 kg (14,220 lb)Traktorenlexikon, “Hürlimann H 6160” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 11,400 kg (25,133 lb)Traktorenlexikon, “Ford 8730” | 9,300 kg (20,503 lb)Traktorenlexikon, “Hürlimann H 6160” | AheadThe Ford 8730 has 23% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Hürlimann H-6160 A (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16 to 18Traktorenlexikon, “Ford 8730” | 12 to 24Traktorenlexikon, “Hürlimann H 6160” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8730 and the H-6160 A. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Ford 8730” | 25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann H 6160” | AheadThe Ford 8730 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-6160 A (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Ford 8730” | 540/1000 rpmTraktorenlexikon, “Hürlimann H 6160” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Ford 8730” | — | No figureNo call on PTO independence: not stated for the H-6160 A. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Ford 8730” | 4WDTraktorenlexikon, “Hürlimann H 6160” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1989–1994 | 1979–1983 | Ahead (a fact, not an advantage)The Ford 8730 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Ford 8730 has 85% more hydraulic flow (49.1 L/min / 13.0 gpm) than the Hürlimann H-6160 A (both pump flow, as stated by the source).
- The Ford 8730 has 23% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Hürlimann H-6160 A (both maximum permissible mass, as stated by the source).
- The Ford 8730 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-6160 A (both top speed forward, as stated by the source).
- The Ford 8730 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources