Ford 8730 vs Hürlimann H-6160 A
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8730 and the H-6160 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 8730 | H-6160 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 151.9 hp | 155.7 hp | — |
| Engine declared | Ford 401 | Hürlimann H-1106/15-Turbo | differs |
| Displacement declared | 6.58 L | 6.84 L | — |
| Maximum torque declared | 387 lb·ft · 525 N·m | 471 lb·ft · 638 N·m | +22% H-6160 A |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 8730 |
| Hydraulics & hitch | |||
| Pump flow declared | 28.3 gpm · 107.1 L/min | 15.3 gpm · 58.0 L/min | +85% 8730 |
| Pressure declared | 2,045 psi · 141 bar | 2,277 psi · 157 bar | +11% H-6160 A |
| Three-point lift at ends declared | 14,991 lb · 6,800 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,859 lb · 6,740 kg | 14,220 lb · 6,450 kg | — |
| Maximum permissible mass declared | 25,133 lb · 11,400 kg | 20,503 lb · 9,300 kg | +23% 8730 |
| Wheelbase declared | 110.8 in · 2,814 mm | 112.5 in · 2,857 mm | — |
| Length declared | 193.4 in · 4,913 mm | 175.2 in · 4,450 mm | +10% 8730 |
| Width declared | 104.5 in · 2,655 mm | 92.5 in · 2,350 mm | +13% 8730 |
| Height declared | 114.1 in · 2,898 mm | 115.0 in · 2,920 mm | — |
| Ground clearance declared | 18.2 in · 462 mm | 19.3 in · 490 mm | +6% H-6160 A |
| Fuel tank declared | 400.5 qt · 379.0 L | 253.6 qt · 240.0 L | +58% 8730 |
Ford 8730 sources
Source
- Source: Traktorenlexikon, “Ford 8730”
Hürlimann H-6160 A sources
Source
- Source: Traktorenlexikon, “Hürlimann H 6160”