12 material differences
Tractor oneFord 8100 A1978–1981No measured PTO figureTractor twoVALMET 11001969–1974No measured PTO figure
Which should you choose?
Read our verdict on the 8100 A and the 1100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 8100 A | 1100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103 hp | 103.5 hp | — |
| Engine declared | Ford 2714 E | VALMET 411 AS | differs |
| Displacement declared | 6.22 L | 4.18 L | +49% 8100 A |
| Maximum torque declared | 274 lb·ft · 372 N·m | 258 lb·ft · 350 N·m | +6% 8100 A |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 1100 |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 11.9 gpm · 45.2 L/min | +29% 1100 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,637 lb · 4,825 kg | 8,190 lb · 3,715 kg | +30% 8100 A |
| Maximum permissible mass declared | 14,991 lb · 6,800 kg | — | — |
| Wheelbase declared | 114.8 in · 2,915 mm | 90.9 in · 2,310 mm | +26% 8100 A |
| Length declared | 181.7 in · 4,615 mm | 149.6 in · 3,800 mm | +21% 8100 A |
| Width declared | 79.1 in · 2,010 mm | 82.3–102.4 in · 2,090–2,600 mm | differs |
| Ground clearance declared | 22.8–26.5 in · 578–673 mm | 18.5 in · 470 mm | differs |
| Turning radius, braked declared | — | 12.5 ft · 3.81 m | — |
| Fuel tank declared | 211.3 qt · 200 L | 100.4 qt · 95.0 L | +111% 8100 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 8100 A sources
Source
- Source: Traktorenlexikon, “Ford 8100”
VALMET 1100 sources
Source
- Source: Traktorenlexikon, “Valmet 1100”