Ford 7740 (A) vs John Deere 3050 (A)

10 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 7740 (A) and the 3050 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 7740 (A) and John Deere 3050 (A), field by field
Field	7740 (A)	3050 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	90.8 hp	—
Engine declared	FORD-POWERSTAR PA 304 CID-TC	John Deere 6.359 DL-008	differs
Displacement declared	4.99 L	5.88 L	+18% 3050 (A)
Maximum torque declared	276 lb·ft · 374 N·m	251 lb·ft · 340 N·m	+10% 7740 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	—	13.8 gpm · 52.3 L/min	—
Pressure declared	2,582 psi · 178 bar	3,336 psi · 230 bar	+29% 3050 (A)
Three-point lift at ends declared	9,425 lb · 4,275 kg	9,978 lb · 4,526 kg	+6% 3050 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	8,642 lb · 3,920 kg	—
Maximum permissible mass declared	—	14,771 lb · 6,700 kg	—
Wheelbase declared	93.0 in · 2,362 mm	100.4 in · 2,551 mm	+8% 3050 (A)
Length declared	176.3 in · 4,478 mm	188.5 in · 4,787 mm	+7% 3050 (A)
Width declared	82.5 in · 2,095 mm	83.8 in · 2,129 mm	—
Height declared	108.9 in · 2,766 mm	116.7 in · 2,964 mm	+7% 3050 (A)
Ground clearance declared	17.0 in · 432 mm	25.6 in · 650 mm	+50% 3050 (A)
Fuel tank declared	100.0 qt · 94.6 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source