11 material differences · fewer than 12
Tractor oneFord 7600 (A)1975–1981No measured PTO figureTractor twoHanomag Robust 901 (S)1969–1970No measured PTO figure
Which should you choose?
Read our verdict on the 7600 (A) and the Robust 901 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 7600 (A) | Robust 901 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90 hp | — |
| Engine declared | Ford 256 DF | Hanomag D162 R2 | differs |
| Displacement declared | — | 4.71 L | — |
| Maximum torque declared | — | 207 lb·ft · 281 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 12.3–16.9 mph · 19.87–27.15 km/h | differs |
| Clutch declared | Pedal operated dry Borg & Beck single disc clutch | Double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.4 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,109 lb · 2,771 kg | 7,055–7,694 lb · 3,200–3,490 kg | differs |
| Wheelbase declared | 87.5 in · 2,223 mm | 98.8 in · 2,510 mm | +13% Robust 901 (S) |
| Length declared | 145.2 in · 3,689 mm | 157.1 in · 3,990 mm | +8% Robust 901 (S) |
| Width declared | 80.7–101.7 in · 2,051–2,584 mm | 76.8 in · 1,950 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 14.2 in · 360 mm | +11% 7600 (A) |
| Turning radius, braked declared | 10.6 ft · 3.23 m | 13.5 ft · 4.10 m | +27% Robust 901 (S) |
| Fuel tank declared | 79.8 qt · 75.5 L | 132.1 qt · 125 L | +66% Robust 901 (S) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7600 (A) sources
- Source: Traktorenlexikon, “Ford 7600”
- Source: Traktorenlexikon, “Ford 6600”
Hanomag Robust 901 (S) sources
- Source: Traktorenlexikon, “Hanomag Robust 901 (S)”