Ford 741/771 Workmaster or Massey Ferguson MF 25?

Which should you choose?

The figures split: the Ford 741/771 Workmaster is ahead on hydraulic flow and top speed; the Massey Ferguson MF 25 is ahead on three-point lift.

  • The Ford 741/771 Workmaster suits road haulage better on this data: 40% (8.0 km/h / 5.0 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 741/771 Workmaster and Massey Ferguson MF 25, with the call on each
Question741/771 WorkmasterMF 25Call
Which puts more power through the PTO shaft?18.8 kW (25.2 hp)Traktorenlexikon, “Ford 701”17.9 kW (24.0 hp)Traktorenlexikon, “Massey Ferguson MF 25”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 741/771 Workmaster and the MF 25.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 741/771 Workmaster and the MF 25.
Which pumps more oil for implements?15.0 L/min (4.0 gpm)Traktorenlexikon, “Ford 701”9.6 L/min (2.5 gpm)Traktorenlexikon, “Massey Ferguson MF 25”AheadThe Ford 741/771 Workmaster has 56% more hydraulic flow (5.4 L/min / 1.4 gpm) than the Massey Ferguson MF 25 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?567 kg (1,250 lb)Traktorenlexikon, “Ford 701”1,040 kg (2,293 lb)Traktorenlexikon, “Massey Ferguson MF 25”AheadThe Massey Ferguson MF 25 has 83% more lift (473 kg / 1,043 lb) than the Ford 741/771 Workmaster (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,542 kg (3,400 lb)Traktorenlexikon, “Ford 701”1,470 kg (3,241 lb)Traktorenlexikon, “Massey Ferguson MF 25”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 741/771 Workmaster and the MF 25.
Which has the wider choice of gears?4 to 10Traktorenlexikon, “Ford 701”8Traktorenlexikon, “Massey Ferguson MF 25”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 741/771 Workmaster and the MF 25.
Which is faster on the road?28 km/h (17.4 mph)Traktorenlexikon, “Ford 701”20 km/h (12.4 mph)Traktorenlexikon, “Massey Ferguson MF 25”AheadThe Ford 741/771 Workmaster has 40% more top speed (8.0 km/h / 5.0 mph) than the Massey Ferguson MF 25 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 701”No figureNo call on PTO speeds: no standard PTO speed stated for the MF 25.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 25”No figureNo call on PTO independence: not stated for the 741/771 Workmaster.
Which drives on both axles?2WDTraktorenlexikon, “Ford 701”2WDTraktorenlexikon, “Massey Ferguson MF 25”; Traktorenlexikon, “Massey Ferguson MF 25 S/V”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1958–19621961–1963EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 741/771 Workmaster has 56% more hydraulic flow (5.4 L/min / 1.4 gpm) than the Massey Ferguson MF 25 (both pump flow, as stated by the source).
  • The Massey Ferguson MF 25 has 83% more lift (473 kg / 1,043 lb) than the Ford 741/771 Workmaster (both lift at the hitch ends, as stated by the source).
  • The Ford 741/771 Workmaster has 40% more top speed (8.0 km/h / 5.0 mph) than the Massey Ferguson MF 25 (both top speed forward, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources