Ford 741/771 Workmaster vs Massey Ferguson MF 25

10 material differences · fewer than 12

Tractor one

1958–1962

No measured PTO figure

Tractor two

1961–1963

No measured PTO figure

Which should you choose?

Read our verdict on the 741/771 Workmaster and the MF 25 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 741/771 Workmaster and Massey Ferguson MF 25, field by field
Field	741/771 Workmaster	MF 25	Gap
Engine
Engine power, claimed claimed	42.1 hp	24.7 hp	+71% 741/771 Workmaster
Engine declared	—	Perkins A 4.107	—
Displacement declared	—	1.75 L	—
Maximum torque declared	121 lb·ft · 164 N·m	74 lb·ft · 100 N·m	+64% 741/771 Workmaster
Transmission
Top speed declared	17.4 mph · 28 km/h	12.4 mph · 20 km/h	+40% 741/771 Workmaster
Clutch declared	—	Pedal operated dry air-cooled MF double clutch	—
Hydraulics & hitch
Pump flow declared	4.0 gpm · 15.0 L/min	2.5 gpm · 9.6 L/min	+56% 741/771 Workmaster
Pressure declared	—	1,991 psi · 137 bar	—
Three-point lift at ends declared	1,250 lb · 567 kg	2,293 lb · 1,040 kg	+83% MF 25
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,400 lb · 1,542 kg	3,241 lb · 1,470 kg	—
Wheelbase declared	85.3 in · 2,167 mm	72.0 in · 1,830 mm	+18% 741/771 Workmaster
Length declared	132.0 in · 3,353 mm	114.6 in · 2,910 mm	+15% 741/771 Workmaster
Width declared	71.7 in · 1,821 mm	63.0 in · 1,600 mm	+14% 741/771 Workmaster
Height declared	65.1 in · 1,653 mm	55.1 in · 1,400 mm	+18% 741/771 Workmaster
Ground clearance declared	27.5 in · 698 mm	13.4 in · 340 mm	+105% 741/771 Workmaster
Turning radius, braked declared	9.2 ft · 2.81 m	9.0 ft · 2.75 m	—
Fuel tank declared	62.3 qt · 59.0 L	47.6 qt · 45 L	+31% 741/771 Workmaster

Source

Source