Ford 5640 (A) vs VALMET 4600

10 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 5640 (A) and the 4600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 5640 (A) and VALMET 4600, field by field
Field	5640 (A)	4600	Gap
Engine
Engine power, claimed claimed	74.0 hp	78.9 hp	+7% 4600
Engine declared	FORD-POWERSTAR EA 268 CID-NA	VALMET 420 D	differs
Displacement declared	4.39 L	4.40 L	—
Maximum torque declared	202 lb·ft · 274 N·m	214 lb·ft · 290 N·m	+6% 4600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.0 gpm · 34.0 L/min	10.3 gpm · 39.0 L/min	+15% 4600
Pressure declared	2,582 psi · 178 bar	2,901 psi · 200 bar	+12% 4600
Three-point lift at ends declared	6,349 lb · 2,880 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	8,128 lb · 3,687 kg	6,945 lb · 3,150 kg	+17% 5640 (A)
Wheelbase declared	92.1 in · 2,340 mm	94.0 in · 2,387 mm	—
Length declared	159.8 in · 4,058 mm	149.2 in · 3,790 mm	+7% 5640 (A)
Width declared	77.7 in · 1,973 mm	81.5 in · 2,070 mm	—
Height declared	106.9 in · 2,716 mm	95.1 in · 2,415 mm	+12% 5640 (A)
Ground clearance declared	16.0 in · 406 mm	17.1 in · 435 mm	+7% 4600
Turning radius, braked declared	—	14.8 ft · 4.50 m	—
Fuel tank declared	100.0 qt · 94.6 L	100.4 qt · 95.0 L	—

Source

Source