5 material differences · fewer than 12

Tractor oneFord 5411958–1962No measured PTO figureTractor twoJohn Deere 601952–1957No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (68%); they were not built in overlapping years (1958–1962; 1952–1957). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

5 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 541 and John Deere 60, field by field
Field54160Gap
Engine
Engine power, claimed claimed36.5 hp36.9 hp—
Transmission
Top speed declared12.4 mph · 20 km/h11.0 mph · 17.7 km/h+13% 541
Clutch declared—Pedal-operated dry single-plate clutch—
Hydraulics & hitch
Pump flow declared4.0 gpm · 15.0 L/min8.9 gpm · 33.7 L/min+125% 60
Rear PTO speeds declared540 rpm536 rpmdiffers
Weight & dimensions
Unladen weight declared3,512 lb · 1,593 kg5,908 lb · 2,680 kg+68% 60
Wheelbase declared89.0 in · 2,261 mm90.0 in · 2,286 mm—
Length declared140.5 in · 3,569 mm139.0 in · 3,531 mm—
Width declared55.6 in · 1,412 mm86.6 in · 2,200 mm+56% 60
Ground clearance declared19.4 in · 494 mm——
Turning radius, braked declared10.0 ft · 3.05 m——
Fuel tank declared44.0 qt · 41.6 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 541 sources

Source
  • Source: Traktorenlexikon, “Ford 501”

John Deere 60 sources

Source
  • Source: Traktorenlexikon, “John Deere Modell 60”