9 material differences · fewer than 12
Tractor oneFord 4110 (A)1981–1991No measured PTO figureTractor twoMassey Ferguson MF 1551969–1976No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 2WD); they were not built in overlapping years (1981–1991; 1969–1976). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 4110 (A) | MF 155 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | — | Perkins AD 4.203 | — |
| Displacement declared | — | 3.34 L | — |
| Maximum torque declared | 139 lb·ft · 189 N·m | 153 lb·ft · 208 N·m | +10% MF 155 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 12.4 mph · 20 km/h | +50% 4110 (A) |
| Clutch declared | Foot-operated dry Borg & Beck single-disc clutch | Pedal operated dry and air-cooled MF double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.1 gpm · 30.7 L/min | 4.3 gpm · 16.4 L/min | +87% 4110 (A) |
| Pressure declared | — | 3,001 psi · 207 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,820 lb · 2,640 kg | 4,850 lb · 2,200 kg | +20% 4110 (A) |
| Wheelbase declared | 77.5 in · 1,969 mm | 78.3 in · 1,990 mm | — |
| Length declared | 135.8 in · 3,450 mm | 129.5 in · 3,290 mm | — |
| Width declared | 68.5–92.5 in · 1,740–2,350 mm | 72.4 in · 1,840 mm | differs |
| Ground clearance declared | 13.9 in · 354 mm | 15.4 in · 390 mm | +10% MF 155 |
| Turning radius, braked declared | 10.0 ft · 3.05 m | 9.4 ft · 2.87 m | +6% 4110 (A) |
| Fuel tank declared | 52.0 qt · 49.2 L | 71.9 qt · 68.0 L | +38% MF 155 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4110 (A) sources
- Source: Traktorenlexikon, “Ford 4110”
Massey Ferguson MF 155 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 155”
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”