Ford 3930 (A) vs Steyr 8060 (a)

12 material differences

Tractor one

1990–1999

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 3930 (A) and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 3930 (A) and Steyr 8060 (a), field by field
Field	3930 (A)	8060 (a)	Gap
Engine
Engine power, claimed claimed	50.3 hp	47.3 hp	+6% 3930 (A)
Engine declared	Ford C 201 CID-NA	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	3.29 L	2.59 L	+27% 3930 (A)
Maximum torque declared	137 lb·ft · 186 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry AP single-disc clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.8 gpm · 33.2 L/min	6.4 gpm · 24.1 L/min	+38% 3930 (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	3,553 psi · 245 bar	differs
Three-point lift at ends declared	4,299 lb · 1,950 kg	4,850 lb · 2,200 kg	+13% 8060 (a)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,045 lb · 2,742 kg	5,335 lb · 2,420 kg	+13% 3930 (A)
Wheelbase declared	84.5 in · 2,146 mm	80.1 in · 2,035 mm	+5% 3930 (A)
Length declared	138.8 in · 3,525 mm	137.6 in · 3,495 mm	—
Width declared	69.7 in · 1,771 mm	67.3 in · 1,710 mm	—
Height declared	96.0 in · 2,438 mm	92.9 in · 2,360 mm	—
Ground clearance declared	12.2 in · 310 mm	14.2 in · 360 mm	+16% 8060 (a)
Turning radius, braked declared	—	10.6 ft · 3.24 m	—
Fuel tank declared	69.4 qt · 65.7 L	101.4 qt · 96.0 L	+46% 8060 (a)

Source

Source