Ford 3930 (A) vs John Deere 5200 (A)

10 material differences · fewer than 12

Tractor one

1990–1999

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 3930 (A) and the 5200 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Ford 3930 (A) and John Deere 5200 (A), field by field
Field	3930 (A)	5200 (A)	Gap
Engine
Engine power, claimed claimed	50.3 hp	39.4 hp	+28% 3930 (A)
Engine declared	Ford C 201 CID-NA	John Deere 3.029	differs
Displacement declared	3.29 L	2.94 L	+12% 3930 (A)
Maximum torque declared	137 lb·ft · 186 N·m	115 lb·ft · 156 N·m	+19% 3930 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry AP single-disc clutch	Pedal-operated dry CARRARO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	8.8 gpm · 33.2 L/min	11.8 gpm · 44.7 L/min	+35% 5200 (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	3,408 psi · 235 bar	differs
Three-point lift at ends declared	4,299 lb · 1,950 kg	3,803 lb · 1,725 kg	+13% 3930 (A)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	6,045 lb · 2,742 kg	4,248 lb · 1,927 kg	+42% 3930 (A)
Wheelbase declared	84.5 in · 2,146 mm	80.7 in · 2,050 mm	—
Length declared	138.8 in · 3,525 mm	139.4 in · 3,541 mm	—
Width declared	69.7 in · 1,771 mm	72.7 in · 1,846 mm	—
Height declared	96.0 in · 2,438 mm	90.1 in · 2,289 mm	+7% 3930 (A)
Ground clearance declared	12.2 in · 310 mm	19.3 in · 490 mm	+58% 5200 (A)
Turning radius, braked declared	—	9.8 ft · 3.00 m	—
Fuel tank declared	69.4 qt · 65.7 L	72.0 qt · 68.1 L	—

Source

Source