Ford 3610 or Massey Ferguson MF 255?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Ford 3610 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
  • The Ford 3610 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 3610 and Massey Ferguson MF 255, with the call on each
Question3610MF 255Call
Which puts more power through the PTO shaft?34.6 kW (46.4 hp)Traktorenlexikon, “Ford 3610”34.6 kW (46.4 hp)Traktorenlexikon, “Massey Ferguson MF 255”Not comparableNot comparable on power at the PTO shaft: the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 3610 and the MF 255.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 3610 and the MF 255.
Which pumps more oil for implements?27.4 L/min (7.2 gpm)Traktorenlexikon, “Ford 3610”17.0 L/min (4.5 gpm)Traktorenlexikon, “Massey Ferguson MF 255”AheadThe Ford 3610 has 61% more hydraulic flow (10.4 L/min / 2.7 gpm) than the Massey Ferguson 255 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,413 kg (3,115 lb)Traktorenlexikon, “Ford 3610”1,800 kg (3,968 lb)Traktorenlexikon, “Massey Ferguson MF 255”AheadThe Massey Ferguson 255 has 27% more lift (387 kg / 853 lb) than the Ford 3610 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,420 kg (5,335 lb)Traktorenlexikon, “Ford 3610”2,340 kg (5,159 lb)Traktorenlexikon, “Massey Ferguson MF 255”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 3610 and the MF 255.
Which has the wider choice of gears?8Traktorenlexikon, “Ford 3610”8Traktorenlexikon, “Massey Ferguson MF 255”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 3610 and the MF 255.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Ford 3610”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 255”AheadThe Ford 3610 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 255 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 3610”540 rpmTraktorenlexikon, “Massey Ferguson MF 255”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford 3610”independentTraktorenlexikon, “Massey Ferguson MF 255”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Ford 3610”2WDTraktorenlexikon, “Massey Ferguson MF 255”AheadThe Ford 3610 is available with four-wheel drive; the Massey Ferguson 255 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1981–19831975–1981Ahead (a fact, not an advantage)The Ford 3610 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 3610 has 61% more hydraulic flow (10.4 L/min / 2.7 gpm) than the Massey Ferguson 255 (both pump flow, as stated by the source).
  • The Massey Ferguson 255 has 27% more lift (387 kg / 853 lb) than the Ford 3610 (both lift at the hitch ends, as stated by the source).
  • The Ford 3610 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 255 (both top speed forward, as stated by the source).
  • The Ford 3610 is available with four-wheel drive; the Massey Ferguson 255 is two-wheel drive (as stated by the sources).
  • The Ford 3610 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Not comparable on power at the PTO shaft: the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources