Ford 3610 vs Ford 3930 (A)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3610 and the 3930 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 3610 | 3930 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 46.4 hp | 50.3 hp | +8% 3930 (A) |
| Engine declared | — | Ford C 201 CID-NA | — |
| Displacement declared | — | 3.29 L | — |
| Maximum torque declared | 132 lb·ft · 179.5 N·m | 137 lb·ft · 186 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated dry AP single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.2 gpm · 27.4 L/min | 8.8 gpm · 33.2 L/min | +21% 3930 (A) |
| Pressure declared | — | 1,378–1,450 psi · 95–100 bar | — |
| Three-point lift at ends declared | 3,115 lb · 1,413 kg | 4,299 lb · 1,950 kg | +38% 3930 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,335 lb · 2,420 kg | 6,045 lb · 2,742 kg | +13% 3930 (A) |
| Wheelbase declared | 75.8 in · 1,925 mm | 84.5 in · 2,146 mm | +11% 3930 (A) |
| Length declared | 128.0 in · 3,250 mm | 138.8 in · 3,525 mm | +8% 3930 (A) |
| Width declared | 64.6 in · 1,640 mm | 69.7 in · 1,771 mm | +8% 3930 (A) |
| Height declared | 84.6 in · 2,150 mm | 96.0 in · 2,438 mm | +13% 3930 (A) |
| Ground clearance declared | 12.4 in · 315 mm | 12.2 in · 310 mm | — |
| Turning radius, braked declared | 10.1 ft · 3.07 m | — | — |
| Fuel tank declared | 52.0 qt · 49.2 L | 69.4 qt · 65.7 L | +34% 3930 (A) |
Ford 3610 sources
Source
- Source: Traktorenlexikon, “Ford 3610”
Ford 3930 (A) sources
Source
- Source: Traktorenlexikon, “Ford 3930”