9 material differences · fewer than 12
Tractor oneFord 3230 (A)1990–1994No measured PTO figureTractor twoInternational Harvester 3641976–1977No measured PTO figure
Which should you choose?
Read our verdict on the 3230 (A) and the 364 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3230 (A) | 364 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 36.5 hp | 35.5 hp | — |
| Engine declared | Ford B 192 | INTERNATIONAL HARVESTER BD-154 | differs |
| Displacement declared | 3.14 L | 2.52 L | +24% 3230 (A) |
| Maximum torque declared | 113 lb·ft · 153 N·m | 116 lb·ft · 157 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 3230 (A) |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.0 gpm · 30.3 L/min | 7.2 gpm · 27.3 L/min | +11% 3230 (A) |
| Pressure declared | 1,378–1,450 psi · 95–100 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,373 lb · 2,437 kg | 3,948 lb · 1,791 kg | +36% 3230 (A) |
| Wheelbase declared | 84.5 in · 2,146 mm | 76.5 in · 1,943 mm | +10% 3230 (A) |
| Length declared | 142.0 in · 3,606 mm | 126.0 in · 3,200 mm | +13% 3230 (A) |
| Width declared | 70.7–94.6 in · 1,795–2,402 mm | 65.0 in · 1,651 mm | differs |
| Ground clearance declared | — | 18.5 in · 470 mm | — |
| Turning radius, braked declared | — | 8.2 ft · 2.49 m | — |
| Fuel tank declared | 69.4 qt · 65.7 L | 56.0 qt · 53.0 L | +24% 3230 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 3230 (A) sources
- Source: Traktorenlexikon, “Ford 3230”
- Source: Traktorenlexikon, “Ford 3430”
International Harvester 364 sources
- Source: Traktorenlexikon, “IHC 364”
- Source: Traktorenlexikon, “McCormick B-414”