Ford 3230 (A) vs Hürlimann Prince 435 DT

11 material differences · fewer than 12

Tractor one

1990–1994

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 3230 (A) and the Prince 435 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 1 fields identical or within 5%, which is not counted as material

Ford 3230 (A) and Hürlimann Prince 435 DT, field by field
Field	3230 (A)	Prince 435 DT	Gap
Engine
Engine power, claimed claimed	36.5 hp	34.6 hp	+5% 3230 (A)
Engine declared	Ford B 192	MITSUBISHI K4 F-D	differs
Displacement declared	3.14 L	1.49 L	+111% 3230 (A)
Maximum torque declared	113 lb·ft · 153 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry SDF single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.0 gpm · 30.3 L/min	1.4 gpm · 5.3 L/min	+472% 3230 (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	2,901 psi · 200 bar	differs
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,373 lb · 2,437 kg	2,601 lb · 1,180 kg	+107% 3230 (A)
Wheelbase declared	84.5 in · 2,146 mm	64.2 in · 1,630 mm	+32% 3230 (A)
Length declared	142.0 in · 3,606 mm	116.5 in · 2,960 mm	+22% 3230 (A)
Width declared	70.7 in · 1,795 mm	40.2 in · 1,020 mm	+76% 3230 (A)
Height declared	88.5 in · 2,248 mm	78.7 in · 2,000 mm	+12% 3230 (A)
Ground clearance declared	—	14.2 in · 360 mm	—
Turning radius, braked declared	—	9.0 ft · 2.73 m	—
Fuel tank declared	69.4 qt · 65.7 L	30.6 qt · 29.0 L	+127% 3230 (A)

Source

Source