Ford 2910 vs John Deere 930
5 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1983–1991; 1974–1977). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 2910 | 930 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 40.5 hp | 40.5 hp | — |
| Engine declared | — | John Deere 3.164 DL 15 | — |
| Displacement declared | — | 2.70 L | — |
| Maximum torque declared | 122 lb·ft · 165 N·m | 107 lb·ft · 145 N·m | +14% 2910 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30.0 km/h | 16.8–18.6 mph · 27–30 km/h | differs |
| Clutch declared | — | Pedal operated, two-stage dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.7 gpm · 29.0 L/min | 6.7 gpm · 25.4 L/min | +14% 2910 |
| Pressure declared | 2,553 psi · 176 bar | 3,481–4,496 psi · 240–310 bar | differs |
| Three-point lift at ends declared | — | 3,490 lb · 1,583 kg | — |
| Rear PTO speeds declared | 540 rpm | — | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,850 lb · 2,200 kg | 4,817 lb · 2,185 kg | — |
| Maximum permissible mass declared | — | 7,055 lb · 3,200 kg | — |
| Wheelbase declared | 77.5 in · 1,969 mm | 74.4 in · 1,890 mm | — |
| Length declared | 134.6 in · 3,418 mm | 136.2 in · 3,460 mm | — |
| Width declared | 68.4 in · 1,737 mm | 66.5 in · 1,690 mm | — |
| Height declared | 89.5 in · 2,274 mm | 89.8 in · 2,280 mm | — |
| Ground clearance declared | 12.5 in · 317 mm | 12.8 in · 325 mm | — |
| Turning radius, braked declared | — | 9.6 ft · 2.92 m | — |
| Fuel tank declared | 52.1 qt · 49.3 L | 66.0 qt · 62.5 L | +27% 930 |
Ford 2910 sources
Source
- Source: Traktorenlexikon, “Ford 2910”
John Deere 930 sources
Source
- Source: Traktorenlexikon, “John Deere 930”