8 material differences · fewer than 12
Tractor oneFord 26001975–1981No measured PTO figureTractor twoURSUS 28121988–2009No measured PTO figure
Which should you choose?
Read our verdict on the 2600 and the 2812 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2600 | 2812 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.4 hp | 37.4 hp | — |
| Engine declared | — | URSUS 3250 | — |
| Displacement declared | — | 2.50 L | — |
| Maximum torque declared | — | 114 lb·ft · 155 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 2600 |
| Hydraulics & hitch | |||
| Pump flow declared | 8.3 gpm · 31.4 L/min | 5.0 gpm · 18.8 L/min | +67% 2600 |
| Pressure declared | — | 3,002 psi · 207 bar | — |
| Three-point lift, at the coupling points declared | 2,800 lb · 1,270 kg | 3,012 lb · 1,366 kg | +8% 2812 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,816 lb · 1,731 kg | 4,453 lb · 2,020 kg | +17% 2812 |
| Wheelbase declared | 75.8 in · 1,925 mm | 76.0 in · 1,930 mm | — |
| Length declared | 127.0 in · 3,226 mm | 126.0 in · 3,200 mm | — |
| Width declared | 65.5–96.1 in · 1,664–2,440 mm | 66.5–90.2 in · 1,690–2,290 mm | differs |
| Ground clearance declared | 21.7 in · 550 mm | 11.2 in · 285 mm | +93% 2600 |
| Turning radius, braked declared | 9.6 ft · 2.93 m | 10.8 ft · 3.30 m | +13% 2812 |
| Fuel tank declared | 51.9 qt · 49.1 L | 61.3 qt · 58.0 L | +18% 2812 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 2600 sources
Source
- Source: Traktorenlexikon, “Ford 2600”
URSUS 2812 sources
Source
- Source: Traktorenlexikon, “Ursus 2812”