13 material differences

Tractor oneFord 2120 (A)1987–1991No measured PTO figureTractor twoNew Holland 32351996–1999No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1987–1991; 1996–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 2120 (A) and New Holland 3235, field by field
Field2120 (A)3235Gap
Engine
Engine power, claimed claimed39.4 hp38.5 hp—
Engine declaredISHIKAWAJIMA-SHIBAURA T-854 BIVECO 8035.06differs
Displacement declared2.30 L2.71 L+18% 3235
Maximum torque declared89 lb·ft · 121 N·m99 lb·ft · 134 N·m+11% 3235
Transmission
Top speed declared15.5 mph · 25 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredPedal operated dry Daikin double clutchDry OMG or LuK double clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared9.9 gpm · 37.5 L/min9.2 gpm · 35.0 L/min+7% 2120 (A)
Pressure declared1,697 psi · 117 bar3,263 psi · 225 bar+92% 3235
Three-point lift, at the coupling points declared4,718 lb · 2,140 kg3,726 lb · 1,690 kg+27% 2120 (A)
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,571 lb · 1,620 kg3,792 lb · 1,720 kg+6% 3235
Wheelbase declared74.4 in · 1,890 mm78.7 in · 1,999 mm+6% 3235
Length declared137.2 in · 3,485 mm128.0 in · 3,250 mm+7% 2120 (A)
Width declared64.2–90.4 in · 1,631–2,295 mm64.6–84.3 in · 1,640–2,140 mmdiffers
Ground clearance declared13.8 in · 350 mm14.8 in · 375 mm+7% 3235
Turning radius, braked declared—10.1 ft · 3.07 m—
Fuel tank declared44.4 qt · 42.0 L44.4 qt · 42.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 2120 (A) sources

Source
  • Source: Traktorenlexikon, “Ford 2120”
  • Source: Traktorenlexikon, “Ford 2110”

New Holland 3235 sources

Source
  • Source: Traktorenlexikon, “New Holland 3235”
  • Source: Traktorenlexikon, “New Holland 3435”