Ford 2110 (A) vs SAME 45 DT

13 material differences

Tractor one

1983–1987

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 2110 (A) and the 45 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Ford 2110 (A) and SAME 45 DT, field by field
Field	2110 (A)	45 DT	Gap
Engine
Engine power, claimed claimed	37.4 hp	41.4 hp	+11% 45 DT
Engine declared	ISHIKAWAJIMA-SHIBAURA T-854 B	MITSUBISHI K 4 F-DT	differs
Displacement declared	2.30 L	1.49 L	+54% 2110 (A)
Maximum torque declared	90 lb·ft · 121.4 N·m	74 lb·ft · 100.2 N·m	+21% 2110 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2110 (A)
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.5 L/min	7.9 gpm · 30.0 L/min	+8% 2110 (A)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	2,646 lb · 1,200 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,660 lb · 1,660 kg	2,227 lb · 1,010 kg	+64% 2110 (A)
Maximum permissible mass declared	—	5,291 lb · 2,400 kg	—
Wheelbase declared	73.4 in · 1,864 mm	66.9 in · 1,700 mm	+10% 2110 (A)
Length declared	130.7 in · 3,320 mm	119.3 in · 3,030 mm	+10% 2110 (A)
Width declared	61.4 in · 1,560 mm	49.4 in · 1,255 mm	+24% 2110 (A)
Height declared	79.9 in · 2,029 mm	84.8 in · 2,155 mm	+6% 45 DT
Ground clearance declared	15.4 in · 390 mm	15.0 in · 380 mm	—
Turning radius, braked declared	9.5 ft · 2.90 m	10.8 ft · 3.30 m	+14% 45 DT
Fuel tank declared	42.5 qt · 40.2 L	30.6 qt · 29.0 L	+39% 2110 (A)

Source

Source