9 material differences · fewer than 12
Tractor oneFord 2110 (A)1983–1987No measured PTO figureTractor twoIMT 5391980–1990No measured PTO figure
Which should you choose?
Read our verdict on the 2110 (A) and the 539 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 2110 (A) | 539 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.4 hp | 38.5 hp | — |
| Engine declared | ISHIKAWAJIMA-SHIBAURA T-854 B | IMR M-33/T-LP | differs |
| Displacement declared | 2.30 L | 2.50 L | +9% 539 |
| Maximum torque declared | 90 lb·ft · 121.4 N·m | 111 lb·ft · 150 N·m | +24% 539 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.9 mph · 24 km/h | +25% 2110 (A) |
| Clutch declared | — | Pedal-operated, dry two-stage IKARUS-ZEMUM double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.5 L/min | 4.2 gpm · 16.0 L/min | +103% 2110 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,660 lb · 1,660 kg | 3,175 lb · 1,440 kg | +15% 2110 (A) |
| Wheelbase declared | 73.4 in · 1,864 mm | 72.0 in · 1,830 mm | — |
| Length declared | 130.7 in · 3,320 mm | 117.0 in · 2,972 mm | +12% 2110 (A) |
| Width declared | 61.4 in · 1,560 mm | 64.0 in · 1,625 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 21.0 in · 533 mm | +37% 539 |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 42.5 qt · 40.2 L | 37.0 qt · 35.0 L | +15% 2110 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 2110 (A) sources
- Source: Traktorenlexikon, “Ford 2110”
IMT 539 sources
- Source: Traktorenlexikon, “IMT 539”