Ford 1920 (A) vs Hürlimann Prince 435 DT

14 material differences

Tractor one

1987–2000

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 1920 (A) and the Prince 435 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 0 fields identical or within 5%, which is not counted as material

Ford 1920 (A) and Hürlimann Prince 435 DT, field by field
Field	1920 (A)	Prince 435 DT	Gap
Engine
Engine power, claimed claimed	31.5 hp	34.6 hp	+10% Prince 435 DT
Engine declared	ISHIKAWAJIMA-SHIBAURA N-844	MITSUBISHI K4 F-D	differs
Displacement declared	2.00 L	1.49 L	+34% 1920 (A)
Maximum torque declared	87 lb·ft · 118 N·m	—	—
Transmission
Top speed declared	13.7 mph · 22 km/h	18.6 mph · 30 km/h	+36% Prince 435 DT
Clutch declared	Pedal-operated, dry DAIKIN double clutch	Pedal-operated dry SDF single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	7.9 gpm · 30.0 L/min	1.4 gpm · 5.3 L/min	+466% 1920 (A)
Pressure declared	1,421 psi · 98 bar	2,901 psi · 200 bar	+104% Prince 435 DT
Three-point lift at ends declared	2,568 lb · 1,165 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	2,844 lb · 1,290 kg	2,601 lb · 1,180 kg	+9% 1920 (A)
Wheelbase declared	69.9 in · 1,775 mm	64.2 in · 1,630 mm	+9% 1920 (A)
Length declared	126.4 in · 3,210 mm	116.5 in · 2,960 mm	+8% 1920 (A)
Width declared	59.6 in · 1,515 mm	40.2 in · 1,020 mm	+49% 1920 (A)
Height declared	88.2 in · 2,240 mm	78.7 in · 2,000 mm	+12% 1920 (A)
Ground clearance declared	12.6 in · 320 mm	14.2 in · 360 mm	+13% Prince 435 DT
Turning radius, braked declared	—	9.0 ft · 2.73 m	—
Fuel tank declared	41.2 qt · 39.0 L	30.6 qt · 29.0 L	+34% 1920 (A)

Source

Source