12 material differences

Tractor oneFord 1700 (A)1979–1982No measured PTO figureTractor twoSAME 25 DT1992–2004No measured PTO figure

Which should you choose?

Read our verdict on the 1700 (A) and the 25 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 1700 (A) and SAME 25 DT, field by field
Field	1700 (A)	25 DT	Gap
Engine
Engine power, claimed claimed	24.7 hp	24.7 hp	—
Engine declared	ISHIKAWAJIMA-SHIBAURA LE-892	MITSUBISHI K3 F-D	differs
Displacement declared	1.27 L	1.12 L	+14% 1700 (A)
Maximum torque declared	—	44 lb·ft · 59.8 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% 25 DT
Clutch declared	Pedal-operated dry double clutch	Pedal operated dry single plate driving clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	7.8 gpm · 29.5 L/min	5.8 gpm · 22.0 L/min	+34% 1700 (A)
Pressure declared	—	2,973 psi · 205 bar	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	2,447 lb · 1,110 kg	2,216 lb · 1,005 kg	+10% 1700 (A)
Maximum permissible mass declared	—	4,630 lb · 2,100 kg	—
Wheelbase declared	62.6 in · 1,590 mm	60.6 in · 1,540 mm	—
Length declared	110.2 in · 2,800 mm	105.9 in · 2,690 mm	—
Width declared	54.3 in · 1,380 mm	44.1–50.4 in · 1,120–1,280 mm	differs
Height, over the roll bar declared	85.4 in · 2,170 mm	77.2 in · 1,960 mm	+11% 1700 (A)
Ground clearance declared	14.2 in · 360 mm	11.4 in · 290 mm	+24% 1700 (A)
Turning radius, braked declared	7.5 ft · 2.30 m	8.5 ft · 2.60 m	+13% 25 DT
Fuel tank declared	23.2 qt · 22.0 L	30.6 qt · 29.0 L	+32% 25 DT

Source

Source