Fiat TS 110 (DT) vs John Deere 6410

11 material differences · fewer than 12

Tractor one

1997–2003

No measured PTO figure

Tractor two

1997–2003

98.0 hp

Measured at the PTO · OECD Test 1806

Which should you choose?

Read our verdict on the TS 110 (DT) and the 6410 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat TS 110 (DT) and John Deere 6410, field by field
Field	TS 110 (DT)	6410	Gap
Measured performance
PTO power, measured measured	—	98.0 hp	—
Drawbar power, measured measured	—	79.7 hp	—
Engine
Engine power, claimed claimed	98.7 hp	—	—
Engine declared	New Holland 450 T/PD	John Deere 4045TL056	differs
Displacement declared	4.99 L	4.53 L	+10% TS 110 (DT)
Maximum torque declared	314 lb·ft · 426 N·m	307 lb·ft · 416.0 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	20.9 gpm · 79.0 L/min	—	—
Pressure declared	2,857 psi · 197 bar	3,017–3,220 psi · 208–222 bar	differs
Three-point lift at ends declared	7,760 lb · 3,520 kg	13,264 lb · 6,016 kg	+71% 6410
Rear PTO speeds declared	540/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,706 lb · 3,949 kg	9,039–9,678 lb · 4,100–4,390 kg	differs
Maximum permissible mass declared	13,228 lb · 6,000 kg	17,637 lb · 8,000 kg	+33% 6410
Wheelbase declared	91.7 in · 2,330 mm	95.7 in · 2,430 mm	—
Length declared	150.0 in · 3,810 mm	181.5 in · 4,610 mm	+21% 6410
Width declared	85.8 in · 2,180 mm	87.4 in · 2,220 mm	—
Height declared	108.8 in · 2,763 mm	106.1 in · 2,694 mm	—
Ground clearance declared	15.7 in · 400 mm	17.2 in · 436 mm	+9% 6410
Turning radius, braked declared	10.8 ft · 3.30 m	—	—
Fuel tank declared	169.1 qt · 160.0 L	195.5 qt · 185.0 L	+16% 6410

Source

Source