Fiat TN 75 D (DT) vs New Holland TN 75 DA/SA

8 material differences · fewer than 12

Tractor one

1999–2004

No measured PTO figure

Tractor two

2003–2008

No measured PTO figure

Which should you choose?

Read our verdict on the TN 75 D (DT) and the TN 75 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat TN 75 D (DT) and New Holland TN 75 DA/SA, field by field
Field	TN 75 D (DT)	TN 75 DA/SA	Gap
Engine
Engine power, claimed claimed	71 hp	75.0 hp	+5% TN 75 DA/SA
Engine declared	New Holland-Iveco 8035.25	IVECO 8035.25	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	202 lb·ft · 274 N·m	203 lb·ft · 275 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	12.5 gpm · 47.4 L/min	15.6 gpm · 58.9 L/min	+24% TN 75 DA/SA
Pressure declared	—	3,263 psi · 225 bar	—
Three-point lift at ends declared	5,886 lb · 2,670 kg	5,351 lb · 2,427 kg	+10% TN 75 D (DT)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	5,214 lb · 2,365 kg	+29% TN 75 D (DT)
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	83.9 in · 2,130 mm	81.5 in · 2,070 mm	—
Length declared	156.7 in · 3,980 mm	141.8 in · 3,601 mm	+11% TN 75 D (DT)
Width declared	72.8 in · 1,850 mm	73.5 in · 1,867 mm	—
Height declared	94.5 in · 2,400 mm	97.5 in · 2,476 mm	—
Ground clearance declared	15.0 in · 380 mm	13.9 in · 353 mm	+8% TN 75 D (DT)
Turning radius, braked declared	10.5 ft · 3.20 m	—	—
Fuel tank declared	74.0 qt · 70.0 L	56.0 qt · 53.0 L	+32% TN 75 D (DT)

Source

Source