11 material differences · fewer than 12

Tractor oneFiat TN 75 D (DT)1999–2004No measured PTO figureTractor twoHürlimann XA 6572000–2004No measured PTO figure

Which should you choose?

Read our verdict on the TN 75 D (DT) and the XA 657 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TN 75 D (DT) and Hürlimann XA 657, field by field
Field	TN 75 D (DT)	XA 657	Gap
Engine
Engine power, claimed claimed	71 hp	70.9 hp	—
Engine declared	New Holland-Iveco 8035.25	Hürlimann 1000.4 W-5	differs
Displacement declared	2.93 L	4.00 L	+37% XA 657
Maximum torque declared	202 lb·ft · 274 N·m	170 lb·ft · 231 N·m	+19% TN 75 D (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.5 gpm · 47.4 L/min	9.0 gpm · 34.1 L/min	+39% TN 75 D (DT)
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	5,864 lb · 2,660 kg	+15% TN 75 D (DT)
Maximum permissible mass declared	9,700 lb · 4,400 kg	11,023 lb · 5,000 kg	+14% XA 657
Wheelbase declared	83.9 in · 2,130 mm	86.1 in · 2,186 mm	—
Length declared	156.7 in · 3,980 mm	153.5 in · 3,900 mm	—
Width declared	72.8–92.5 in · 1,850–2,350 mm	76.0–91.7 in · 1,930–2,330 mm	—
Height, over the cab declared	94.5 in · 2,400 mm	92.7 in · 2,355 mm	—
Ground clearance declared	15.0 in · 380 mm	15.7 in · 400 mm	+5% XA 657
Turning radius, braked declared	10.5 ft · 3.20 m	12.5 ft · 3.80 m	+19% XA 657
Fuel tank declared	74.0 qt · 70.0 L	95.1 qt · 90.0 L	+29% XA 657

Source

Source